| Customization: | Available |
|---|---|
| After-sales Service: | Free Replacement of Damaged Parts During The Warra |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Feature :
1. When conical grinding, the table can be swiveled to either side and exactly positioned by using the scale
2. Oil film between bearing and spindle keeps vibrations at a minimum level, hence achieving outstanding results and top accuracy
3. Precisely balanced spindle head and solid grinding head guarantee extraordinary results at any type of operation
4. Strong reinforcements and solidly designed panels of the machine base makes it resistant to temperature fluctuations and deformations
5. Spindle is mounted from both sides and features adjustable sliding bearings consisting of three segments
6. Hydrodynamic bearing of spindle, therefore no contact between spindle and bearing
7. Longitudinal table feed can be set to automatic mode -hydraulically driven or manual mode - by hand wheel
8. Stepless feed adjustments with the option of aprogrammable hold time at the end of each table movement
9. Hydraulic or manual repositioning of grinding spindle stock
10.Guide ways in x- and y-axis are precisely constructed and hand-polished
11.Longitudinal table guide and cross guide of grinding headstock each feature a V-guide and flat guide
Specification:
| MODEL | UNIT | M1432B×1000 | M1432B×1500 | M1432B×2000 | M1432B×3000 | ||
| General capacity | |||||||
| Distance between centers | mm | 1000 | 1500 | 2000 | 3000 | ||
| Center height | mm | 180 | 180 | 180 | 180 | ||
| Dia.Ground(O.D) | mm | 8~320 | 8~320 | 8~320 | 8~320 | ||
| Dia.Ground(I.D) | mm | 30~100 | 30~100 | 30~100 | 30~100 | ||
| Max.length ground(O.D) | mm | 1000 | 1500 | 2000 | 3000 | ||
| Max.length ground(I.D) | mm | 125 | 125 | 125 | 125 | ||
| Max weight of work piece | kg | 150 | 150 | 150 | 150 | ||
| Work head | |||||||
| Swiveling angle | +90 | +90 | +90 | +90 | |||
| Center taper | MT | 4 | 4 | 4 | 4 | ||
| Spindle speed | r/min | 50HZ:25-220 60HZ:30-364 |
50HZ:25-220 60HZ:30-364 |
50HZ:25-220 60HZ:30-364 |
50HZ:25-220 60HZ:30-364 |
||
| Wheelhead | |||||||
| Wheel spindle speed | r/min | 1670 | 1670 | 1670 | 1670 | ||
| Wheelhead rapid travel | mm | 50 | 50 | 50 | 50 | ||
| Max travel | mm | 246 | 246 | 205 | 205 | ||
| Swiveling angle | ° | ±30° | ±30° | +10° | +10° | ||
| Hand feed per.rev | mm | rough:2.0 fine:0.5 |
rough:2.0 fine:0.5 |
rough:2.0 fine:0.5 |
rough:2.0 fine:0.5 |
||
| Hand feed per.gra | mm | rough:0.01 fine:0.0025 |
rough:0.01 fine:0.0025 |
rough:0.01 fine:0.0025 |
rough:0.01 fine:0.0025 |
||
| Max dimension of wheel | mm | 400×50×203 | 400×50×203 | 400×50×203 | 400×50×203 | ||
| Internal grinding | |||||||
| Spindle speed | r/min | 10000/15000 | 10000/15000 | 10000/15000 | 10000/15000 | ||
| Dimension of wheel | mm | max:50×25×13 min:17×20×6 |
max:50×25×13 min:17×20×6 |
max:30×25×10 min:17×20×6 |
max:30×25×10 min:17×20×6 |
||
| Table | |||||||
| Hand feed per rev. | mm | 6 | 6 | 6 | 6 | ||
| Max swivelling angle of table | ° | clockwise:3° widdershins:7° |
clockwise:3° widdershins:6° |
clockwise:2° widdershins:5° |
clockwise:2° widdershins:3° |
||
| Longitudinal traverse speed of table | m/min | 0.1~4 | 0.1~4 | 0.1~4 | 0.1~4 | ||
| Tail stock | |||||||
| Center taper | MT | 4 | 4 | 4 | 4 | ||
| Quill travel | mm | 30 | 30 | 30 | 30 | ||
| Motor | |||||||
| Wheelhead motor power | Kw | 5.5 | 5.5 | 5.5 | 5.5 | ||
| Internal grinding | Kw | 1.1 | 1.1 | 1.1 | 1.1 | ||
| Power of workhead motor | Kw | 1.5 | 1.5 | 1.5 | 1.5 | ||
| Machine | |||||||
| Gross weigh | Kg | 5300 | 6100 | 7900 | 9900 | ||
| Packing dimension | cm | 322×200×205 | 422×200×205 | 540×200×205 | 739×228×205 | ||
Standard accessories:
3 jaw chuck
Balance arbor
Measuring bridge plate
Wheel flange
Open type steady rest
Alloy centers
Extent arbor
Dog pole
Dog arm
Table swivel wrench
Coolant tank
Standard wheels
Wheel extractor
Work lamp
Seal rings
High speed strap
Multiple V belt
Internal wheels
Optional accessories
Wheel balancing stand
Magnetic separator
Close type steady rest
End wheel dresser
Radial wheel dresser
Q: Are you a trading company or a physical factory?
A: We are a specialized physical factory for more than 10 years. Our machines also gained CE certificate, ISO9001 and EAC certificate.
Q: What's your main products of your company?
A : We specialized in Vertical Machining Center, CNC Lathe, Milling Machines, Lathes, Drilling Machines, Saws, Shapers and so on.
Q: Can you provide customized machine?
A: Yes, we provide customized service for customers to meet different requirements.
Q: Can we visit your factory?
A: Sure, we warmly welcome you to visit our factory at any time. The more you know about us, the more you will trust us! So you can rest assured on our quality machines and our best service.
Q: What's the Payment Terms ?
A : T/T ,30% deposit when order ,70% balance payment before shipment ; Irrevocable LC at sight.
Q: What is your trade terms?
A: FOB, CIF ,DDP and CFR all acceptable.
){kind=link}