| Customization: | Available |
|---|---|
| After-sales Service: | If Any Parts Are Broken, We Will Send You for Free |
| Warranty: | 3 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | VMC650 |
| X-Axis travel | 650mm |
| Y-Axis travel | 500mm |
| Z-Axis travel | 500mm |
| Distance from Spindle nose to worktable surface | 150-650mm |
| Distance from spindle centre to surface of column ram | 550mm |
| T slot (width×num.) | 18mm×3 |
| Worktable size | 450×900mm |
| Max.loading of worktable | 600Kg |
| Power of spindle motor | 5.5/7.5KW |
| Spindle speed | 6000-8000rpm |
| Spindle taper | BT40 |
| Spindle bearing | P4 |
| Rapid traverse speed of 3 axes | X /Y 18m/min |
| Z 15m/min | |
| Cutting feed rate | 1-5000mm/min |
| Min.set unit & moving unit | 0.001mm |
| Pitch of X/Y axes | 6mm |
| Pitch of Z axis | 6mm |
| Positioning accuracy (300mm) | ±0.005 |
| Repeatability accuracy (300mm) | ±0.003 |
| Changing way of tools | Spindle floating/manipulator |
| Tool magazine | 20/24 |
| Tool spec. max.dia. (neighboring Tool)×weight×length | φ80mm×7Kg×300 |
| Tool changing time | 7/3.5S |
| Machine weight | 5500kg |
| Air pressure | 0.6MPa |
| Power of cooling pump for cutting | 370W |
| Overall size | 2805×2300×2600mm |
| Fanuc 0i MF control system |
| Taiwan Spindle: 8000rpm |
| X/Y/Z axes: Fanuc servo drive motor |
| Main motor: Fanuc spindle motor |
| 24 tools Umbrella type |
| USB for information transfer |
| Rough cutting of thread |
| Full closed cover |
| Automatic lubrication |
| Coolant system |
| work lamp |
| Tri-color indication lamp |
| Air gun |
| Heat exchanger in cabinet |
| 3-Axis linear guideway from Taiwan Hiwin |
| Ball leadscrew from Taiwan Hiwin |
| Automatic chip conveyor & chip bucket (Chain type) |
| Automatic chip conveyor & chip bucket (Screw type) |
| Spindle direct driven, speed 12000 rpm |
| Spindle oil cooling |
| Spindle center water spray(only for belt type spoindle) |
| 24 tools disc type |
| Nitrogen balance cylinder |
| Air conditioner for electricity cabinet |
| Oil skimmer |
| High pressure chip flushing system |
| Renishwa tool probe TS27R |
| Renishwa workpiece measure measurement device OMP60 |
| 4th Axis or 5th Axis |
FAQ:
){kind=link}